Do I need to specially prepare the surface? Yes, the surface should always be clean, dry and free of grease. Remove dust, dirt and wax residue thoroughly.
 

Which cleaning agent should I use? A mild cleaning agent without aggressive ingredients is recommended. A mild hand dishwashing detergent is suitable for smooth surfaces.
 

Can I apply the sticker in cold or hot conditions? Ideally, the ambient temperature should be between 15°C and 25°C. Extreme temperatures can impair adhesion. Extreme temperatures can impair adhesion.
 

How do I remove the backing film? Carefully lift one corner of the backing film and slowly peel it off. Make sure that the sticker itself remains on the transfer film.
 

What do I do if the sticker curls? Carefully heat the sticker with a hairdryer to make it more flexible. Then smooth it out with a squeegee or a soft cloth.
 

How do I get rid of air bubbles? You can carefully prick small bubbles with a needle and smooth out the resulting hole. Larger bubbles can often be removed by lifting a corner again and pressing down carefully.
 

How long does the sticker need to dry? Allow the sticker to dry for at least 24 hours before washing your car or exposing it to heavy traffic.
 

Can I remove the sticker again? Yes, our stickers can be removed without damaging the paintwork. Carefully heat the sticker with a hairdryer and slowly peel it off. You can remove any residue with a mild cleaner.
 

What happens if I take the sticker to the car wash? We recommend that you do not wash your vehicle for at least 24 hours after applying the sticker. During this time, the adhesive bonds with the surface.
 

Can I also apply the sticker to uneven surfaces? Yes, but the adhesion may be somewhat weaker. Gently heat the sticker with a hairdryer to make it more flexible.
 

Is the print durable and colourfast? The sticker is UV-resistant and suitable for outdoor use, especially on motor vehicles. With normal use, a durability of 5-7 years can be expected.
 

What is a squeegee and where can I get one? A squeegee is a tool for smoothing film. You can buy them in craft shops or online. Alternatively, you can also use a credit card. For smaller stickers, a thumb is often enough 
 

Can I cut the sticker to size? Yes, you can cut the sticker to size with sharp scissors or a cutter knife. Make sure that the cut edge is clean.
 

Can I cut the sticker to size? Yes, you can cut the sticker to size with sharp scissors or a cutter knife. Make sure that the cut edge is clean.
 

Application area: Suitable for all smooth surfaces indoors and outdoors (e.g. lettering for vehicles, boats, windows, doors and other smooth surfaces)